About Hose Tap Connector You Need to Know

hose tap connector

Garden hose tap connectors are considered critical in domestic settings. These are the additional parts devised at the end of the pipe for attaching heads, sprinklers, or faucets. Brass is by far considered the most popular option owing to its durability and ease of usage. Even though plastic as well as rubber fittings are also widely available and used for domestic or residential purposes.

Why Do You Need A Hose Tap Connector?

Hose tap connectors, frequently termed as hose barbs, are commonly used for controlling flow owing to their reliability, convenience, high performance, and exceptional value. The use of a hose tap connector can range from gardening to biopharmaceutical processing to other industrial usages.

In spite of this wide usage, the mechanism and usage of hose tap connectors are not well understood. It is basically a part of the fitting that’s connected to a piece of hose through insertion into the pipe or hose. These connectors generally work well in low water pressure (usually ranging up to 200psi). The serration or ridges in the interior wall offers a sealing surface without inflicting any damage to the pipe wall. The way the barb surface interacts with the inner surface of the hose or tube decides how well the hose tap connector will function.

It is worth investing in a hose tap connector for creating a sealing in between the pipe and its fitting. It is a highly cost-effective system component option that offers a simple yet effective installation and maintenance. Another important factor about these hose tap connectors is that you can avail them in a variety of materials to ensure chemical compatibility. Last but not the least, they offer hose as well as tube connections which are resistant to pull-off and blow-off.

How to Connect A Garden Hose to A Kitchen Tap?

The kitchen tap is definitely one of the most crucial sources of water for the hose, no matter if it’s for gardening or washing purpose. More often than not, when we try to connect a garden hose to a hose tap connector, we find that it doesn’t fit. Thankfully, you will not require loads of fancy equipment for doing the same.

In the first place, you will need to have a properly sized thread adaptor for fitting into the kitchen tap. But before you select the thread adapter, you need to consider the kind of tap you have in the kitchen. Typically, the tap tends to have a fitting underneath made of a rubber stopper from where the water comes out. This needs to be removed before fitting the garden hose and you can easily take it out with bare hands.

Next, you will have to screw the thread adapter to the kitchen tap. Make sure that you don’t force it inside. In case you have chosen the wrong sized adapter, excessive force will damage it along with the tap. As the thread adapter comes in a snug fit, you can proceed to attach the hose. All that you will have to do is to screw an end of the hose to the adapter while the weight of the pipe lies on the sink. Here again, you should be careful to not cross-thread to avoid damage. With this, the process is complete and you can use the garden hose simply by turning the kitchen faucet.

How to Connect A Garden Hose to A Washing Machine?

One of the major reasons why people tend to connect a garden hose to washing machines is due to the lack of a dedicated water source for the machine. Besides, you will also need to connect it to a garden hose if you want to drain the machine to a sewer or other outlet. Fortunately, you can get things done even if you are devoid of serious technical knowledge. Just follow a few steps and you are good to go.

First of all, you will have to wrap the plumber’s tape in a clockwise direction around the male end of the hose pipe. Next, you will have to insert it into the inlet connection coupler of cold water. As you hold the pipe firmly in its position, you must twist the coupler connection of the machine in a clockwise direction and twist it till it becomes snug. You can further tighten the connection by turning it a quarter of a turn.

Then you will again have to tape up the threads of the water hook up of the machine. Alternatively, you may also wrap the threads of the external water spigot. After this, you will have to tighter the coupler connection or the female side into the water hookup of the machine. The male has to be inserted into the threads of the hot water hose. Next, you should secure the connection of the hot water hose in a clockwise direction. To ensure it is properly secured, you will have to tighten it by turning a quarter of the turn. With these steps, you can open the value of both hot and cold water hookup and let the water flow to and from the washing machine through the garden hose.

With that being said, it’s worth mentioning that unwonted leaks can cause major issues in a home over time. The best way to avoid such issues is to keep a track of the duration it takes for the machine to fill up completely. You may set up a timer while filling the machine so that you can have a clear idea of when you need to shut off the source of water.

Final Words

Connecting a garden hose with a kitchen tap or washing machine inlet and outlet are some of the most commonplace requirements of our daily life. Your washing machine may lack an interior water hookup or a washing machine hose. No matter what, you will need a hose tap connector and the knowledge of hooking them up. It’s very simple and the parts are cheap and easily available. With the right size of the connector, you can save yourself from the annoying task of carrying several buckets of water for gardening or washing purpose.